MicroNet Fibre to SAS/SATA II RAID Subsystem Instrukcja Użytkownika Pobierz pdf (Strona 26)

FIBRE-to-SAS/SATA RAID SUBSYSTEM

User Manual

The firmware upgrade process for each type of SES board is different.

For PRO-90-5601 SES board:

1. Connect RS232 serial cable to the RS232 port of SES module.

2. Open terminal connection and configure terminal settings as follows:

Baud Rate: 115200

Data Bits: 8

Parity: None

Stop Bits: 1

Flow Control: None

3. In terminal console, type “proses reset” then immediately press “Q”.

4. Select “Transfer” then “Send File”. Use “Ymodem” protocol. Select the SES

firmware binary file. Click “Send” to start upgrade process.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 159 160

Brak uwag

MicroNet Fibre to SAS/SATA II RAID Subsystem Instrukcja Użytkownika Strona 26